Stabilized sodium hypochlorite 35kg

Stabilized sodium hypochlorite

To reduce the burden on nature and maintain affordable prices, we use recycled packaging wherever possible.

In this way, we reduce the negative footprint that we, as a society, leave for future generations.


UFI: S600-T0W4-S00Q-4627

Biocidal product: type 02, 05. Consumer and professional use.

Use: for disinfection of drinking water, swimming pool water
Instructions for use:

Important: Always wear protective gloves, goggles and clothing when handling to prevent direct contact with skin and eyes. Work in a well-ventilated area.

Application:

Slowly pour or pump the prepared solution into the water system to mix the solution well with the water.

The initial shock dose is 10 to 40 ml of the product per liter of water.

Disinfection of drinking water:

Use a chlorine residual test kit to ensure that the chlorine level is within the desired range (typically 0.2 to 0.5 ppm for drinking water).

Let the chlorine act for at least 30 minutes to 1 hour before consuming the water so that it has enough time to disinfect.

Disinfection of water in swimming pools:

For swimming pools, dose 2 to 10 ml/L (ppm) to achieve the required chlorine level for adequate disinfection (typically 1-3 ppm).

Apply the solution evenly to the pool, ideally with the filtration system turned off, so that the chlorine is evenly distributed.

After application, turn on the filtration system for a few hours. Regularly check the chlorine level and pH of the water.

Keep the water pH between 7.2 - 7.8, as chlorine works most effectively at these pH values.

FEATURES:

• strongly alkaline
• breaks down proteins at room temperature
• highly soluble in water
• corrosive

HOUSEHOLD USE:

• water treatment in swimming pools
  
• surface disinfection
  
• laundry bleaching
  
• mold removal

INDUSTRIAL USE:

• production of cleaning products
• for wastewater treatment
• chemical peeling of fruits and vegetables
• for alkaline degreasing
• It is used as a basis for SAVO.
  
  

Safety precautions:

Never mix with other chemicals.dangerous reactions can occur with potassium, especially acids.

Store in a dry, cool place, out of reach of children and heat sources.

Spectrum of effectiveness: used for bacterial disinfection

Active biocidal substance (g/100g): Sodium hypochlorite (CAS: 7681-52-9) 14g; Sodium troclosan, dihydrate (CAS: 51580-86-0) 0.1g.

Use biocidal products safely. Always read the information on the packaging before use.

signal word Danger

H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H410 Very toxic to aquatic life with long lasting effects.

Instructions for safe handling

P102 Keep out of reach of children. P234 Keep only in original container.

P273 Avoid release to the environment.

P280 Wear protective gloves/protective clothing/safety glasses/face shield.

P301+P330+P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER/doctor.

P390 Absorb spilled product to prevent material damage.

P501 Dispose of contents/container to an authorized person or to a collection point for

hazardous waste. Cleaned packaging without residual product content

dispose of in separate waste.

Supplier: Logistika a obchod sro, Kaprova 42/14, 110 00, Prague Czech Republic, bl@trichem.cz

UN3266

ADR/RID-Class 8

ADR/RID-packing group II

Sub-limit quantity: 333 L